Pole Connectors, Caps, & Inserts
-
Wire Shelving Pole Caps - 4 Pack
As low as $7.99Top off those poles with a Pole Cap! Sold in sets of 4.
FREE SHIPPING!!!
-
Wire Shelving Pole Connectors - 4 Pack
As low as $6.16Pole connectors are used to connect two poles together.. Surprise surprise.
Sold in sets of 4.
NOTE: Our 3 tier stackable racks (C25 series) require the 3/4" diameter and 1.0mm thickness connector. Our B25 and B35 series requires a 7/8" pole diameter and 1.0mm thickness.
NOTE 2: The pole diameter is measured in inches from outer to outer pole with a straight line. The pole thickness is measured in millimeters with a caliper on the smooth end of the pole.
NOTE 3: It has been reported that our pole connectors may not work with certain Home Depot rack models due to a difference in the thread.
FREE SHIPPING!!!
-
Wire Shelving Pole Inserts - Screw In
As low as $5.50Screw in threaded bottom post inserts use for posts that are threaded at the ends.
These inserts are used for attaching casters or feet to any post of its size. Each set contains 4 screw in inserts
NOTE: It has been reported that our inserts may not work with certain Home Depot rack models due to a difference in the thread.
FREE SHIPPING!!!
1" inserts have a bolt size of 3/8"
7/8" inserts have a bolt size of 3/8"
3/4" inserts may have a bolt size of 1/4" or 5/16" be sure of the one you order to match your rack
-
Wire Shelving Push In Pole Inserts - 4 Pack
As low as $4.95Push in threaded bottom pole inserts are used for poles that are not threaded at the ends.
These inserts are used for attaching casters or feet to any pole of its size. Each set contains 4 push in inserts
NOTE: It has been reported that our inserts may not work with certain Home Depot rack models due to a difference in the thread.
FREE SHIPPING!!!
