Search results for: 'b25z 1 a zinc'
-
BJ's 254071/A80C-3
Starting at $5.95
Item specs:
4 - 24x48 shelf >> 800lbs shelf capacity
4 top pole with pole cap & connector
4 bottom pole with leveler
1" pole dia. T=1.2mm
Chrome finish -
Walmart 3T142430Z/C25Z-1/C25W-1
Starting at $6.18
HSS item# C25Z-1 >> 250 lbs shelf, 13.4 IN. D x 23.2 IN. W x 30.6 IN. H , 3/4" pole, T=1.0 -
Walmart B35Z-2/B35Z-3
Starting at $4.95
HSS item# B35Z-2 >> 350 lbs shelf, 16 IN. D x 36 IN. W x 72 IN. H , 7/8" pole, T=1.0 -
Wire Shelf With Plastic Tapered Locks
As low as $12.95Increase efficiency and versatility of your storage unit.
All shelves sold separately.
SEE OUR TABLE BELOW TO REVIEW THE SHELVES WE OFFER TO ENSURE YOU PURCHASE THE CORRECT SIZE FOR YOUR MODEL
Note: All shelves come with TAPERED LOCKS
Note2: All shelves are lip down except for the S1848C this shelf is lip up.
Note3: If you are buying a spare shlf for an existing Walmart or BJ's rack we suggest you purchase from the specfic rack page to ensure you buy the right size. Simply search for the rack model number to find this page.
If you have any questions or concerns, please call 1-866-375-7994
-
Wire Shelving Bottom Poles with Leveling Feet
As low as $8.99Have extra shelves left over from your storage units? No Problem!
These posts will allow you to utilize your extra shelves for more efficient storage.
Poles are sold pack 4.
NOTE: Bottom posts include the FEET LEVELERS.
NOTE2: 1" and 7/8" posts require a caster with a 3/8" bolt size. If you have any questions on our posts, please call us at 866-375-7994
NOTE3: Our 1" and 7/8" poles are 35.5" inches in length and our 3/4" poles are 15" in length
FREE SHIPPING for Item #4BP1PB (Black ONLY)
^ EXCEPT for Hawaii and Alaska- see shipping policy for details
-
Wire Shelving Pole Extensions - 4 Pack [includes Pole Connector]
As low as $14.39Includes Pole Connectors
Important Information Regarding Extension Poles
Extension Poles, Pole Connectors, and Pole Inserts can be tricky to purchase due to the actual pole thickness of the metal used for the extension poles.
If you are looking to purchase pole connectors or inserts and you do not know the thickness of your poles then we would recommend:
• Calling us at 866-375-7994 and if you have your specific model number of your wire rack we may be able to assist you.
•Extension Poles are measuered by pole diameter (outer edge to outer edge) and pole thickness. If you are not sure of your thickness you may wish to use a caliper to measure the pole on a smooth end or call us to see if we can provide guidance.
Note: The C25Z-1 models sold on Walmart or BJ's require a 3/4" diameter and a 1.0mm thickness.