Search results for: '3 2f4 22 pole connectors 10mm diameter'

Screw in threaded bottom post inserts use for posts that are threaded at the ends.

These inserts are used for attaching casters or feet to any post of its size. Each set contains 4 screw in inserts

NOTE: It has been reported that our inserts may not work with certain Home Depot rack models due to a difference in the thread.

FREE SHIPPING!!!

1" inserts have a bolt size of 3/8"

7/8" inserts have a bolt size of 3/8"

3/4" inserts may have a bolt size of 1/4" or 5/16" be sure of the one you order to match your rack

All available accessories. Note we do not carry many accessories in white.

Pole connectors are used to connect two poles together.. Surprise surprise.

Sold in sets of 4.

NOTE: Our 3 tier stackable racks (C25 series) require the 3/4" diameter and 1.0mm thickness connector. Our B25 and B35 series requires a 7/8" pole diameter and 1.0mm thickness.

NOTE 2: The pole diameter is measured in inches from outer to outer pole with a straight line. The pole thickness is measured in millimeters with a caliper on the smooth end of the pole.

NOTE 3: It has been reported that our pole connectors may not work with certain Home Depot rack models due to a difference in the thread.

 FREE SHIPPING!!!

Includes Pole Connectors

Important Information Regarding Extension Poles

Extension Poles, Pole Connectors, and Pole Inserts can be tricky to purchase due to the actual pole thickness of the metal used for the extension poles.

If you are looking to purchase pole connectors or inserts and you do not know the thickness of your poles then we would recommend:

• Calling us at 866-375-7994 and if you have your specific model number of your wire rack we may be able to assist you.

•Extension Poles are measuered by pole diameter (outer edge to outer edge) and pole thickness. If you are not sure of your thickness you may wish to use a caliper to measure the pole on a smooth end or call us to see if we can provide guidance.

Note: The C25Z-1 models sold on Walmart or BJ's require a 3/4" diameter and a 1.0mm thickness.